Epoxy Zinc-Rich Primer Paint Epoxy Coating Ships Nā Alahaka Pena Anti-corrosion
Hōʻike huahana
Epoxy zinc-waiwai primer e like me ka hana kiʻekiʻe-hana kumu mua i hoʻolālā ʻia e hāʻawi i ka ʻoi aku ka maikaʻi o ka pale a me ka corrosion i nā wahi koi loa.
Ma waho aʻe o ka pale rust maikaʻi loa, ua maʻalahi kā mākou epoxy zinc-rich primer e hoʻopili a hāʻawi i kahi maʻalahi, hoʻopau hoʻi. ʻO kāna ʻano ʻāpana ʻelua e hōʻoia i kahi paʻa paʻa a lōʻihi i ka substrate, e hoʻonui hou ana i kona hiki ke pale.
haku mele
ʻO ka epoxy zinc-rich primer kahi huahana hoʻopili kūikawā i haku ʻia me ka epoxy resin, zinc powder, ethyl silicate e like me nā kumu kumu nui, me ka polyamide, thickener, filler, auxiliary agent, solvent, etc. adhesion ikaika, a ʻoi aku ka maikaʻi o ke kūʻokoʻa o waho.
Nā hiʻohiʻona nui
ʻO nā hiʻohiʻona koʻikoʻi o kā mākou epoxy zinc-rich primer ʻo ia kona kūpaʻa maikaʻi loa i ka wai, ka aila a me nā solvents. ʻO ia ke ʻano o ka pale pono ʻana i nā ʻili metala mai ka makū, nā kemika a me nā mea corrosive ʻē aʻe, e hōʻoiaʻiʻo ana i ka lōʻihi o ke ʻano o ka uhi.
Nā Kūlana Huahana
| kalakala | ʻAno Huahana | MOQ | Nui | Volume /(M/L/S nui) | Kaumaha/ hiki | OEM/ODM | Ka nui o ka paʻi ʻana/ ka pahu pepa | Lā Hoʻouna |
| kala moʻo/ OEM | Waiwai | 500 kg | M kini: Kiʻekiʻe: 190mm, Anawaena: 158mm, Anapuni: 500mm, (0.28x 0.5x 0.195) pahu pahu huinaha: Kiʻekiʻe: 256mm, lōʻihi: 169mm, Laulā: 106mm, (0.28x 0.514x 0.26) Hiki iā L ke: Kiʻekiʻe: 370mm, Anawaena: 282mm, Anapuni: 853mm, (0.38x 0.853x 0.39) | M kini:0.0273 mau mika cubic pahu pahu huinaha: 0.0374 mau mika cubic Hiki iā L ke: 0.1264 mika cubic | 3.5kg/20kg | hoʻopilikino ʻae | 355*355*210 | Mea i hoʻopaʻa ʻia: 3~7 mau lā hana Mea i hoʻopilikino ʻia: 7 ~ 20 mau lā hana |
Hoʻohana nui
Inā ʻoe e hana ana i ka ʻoihana moana, kaʻa a ʻoihana paha, ʻo kā mākou epoxy zinc-rich primers he hopena hilinaʻi no ka pale ʻana i nā ʻili metala mai ka corrosion. ko lakou mau pale pale.
Ka laulā o ka noi
Kuhikuhi hana
1, Pono ka ʻili o ka mea i uhi ʻia me ka oxide, ka ʻōpala, ka ʻaila a pēlā aku.
2, Pono ka mahana o ka substrate ma luna o 3 ° C ma luna o ka zero, ke emi ka mahana o ka substrate ma lalo o 5 ° C, ʻaʻole paʻa ke kiʻi pena, no laila ʻaʻole kūpono ia no ke kūkulu ʻana.
3, Ma hope o ka wehe ʻana i ka bākeke o ka ʻāpana A, pono e hoʻoulu ʻia, a laila ninini i ka hui B i loko o ka ʻāpana A ma lalo o ka hoʻoulu ʻana e like me ke koi ʻana o ka ratio, hui pū ʻia, kū, a mālama ʻia Ma hope o 30 mau minuke, e hoʻohui i kahi nui o ka diluent. a hoʻololi i ka viscosity kūkulu.
4, Hoʻohana ʻia ka pena i loko o 6h ma hope o ka hui ʻana.
5, Brush coating, ea spraying, rolling coating hiki ke.
6, Pono e hoʻoulu mau ʻia ke kaʻina hana e pale ai i ka ua.
7, manawa pena:
| Ka wela o ka lepo (°C) | 5~10 | 15-20 | 25-30 |
| ka palena iki (Hora) | 48 | 24 | 12 |
ʻAʻole pono ka wā lōʻihi ma mua o 7 mau lā.
8, paipai kiʻi mānoanoa: 60 ~ 80 microns.
9, dosage: 0.2 ~ 0.25 kg no ka huinahalike (koe ka poho).
Nānā
1, Diluent a me ka dilution ratio: inorganic zinc-waiwai anti-rust primer kūikawā thinner 3% ~ 5%.
2, Ka manawa ho'ōla: 23±2°C 20 minuke. Ka manawa noi: 23±2°C 8 hola. Ka lōʻihi o ka uhi ʻana: 23±2°C ka liʻiliʻi loa he 5 mau hola, ka lōʻihi he 7 lā.
3, Ka mālama ʻana i ka ʻili: pono e hoʻopau ʻia ka ʻili kila e ka grinder a i ʻole sandblasting, i Suedena rust Sa2.5.
4, Manaʻo ʻia ʻo ka helu o nā kahawai uhi: 2 ~ 3, i ke kūkulu ʻana, e hoʻohana ʻia ka hoʻohana ʻana o ka huila uila hoʻokiʻekiʻe ʻO kahi mea (slurry) i hui pū ʻia, pono e hoʻohana ʻia i ka wā e hoʻoulu ai i ka hana. Ma hope o ke kākoʻo ʻana: nā ʻano pena waena a me nā pena kiʻekiʻe i hana ʻia e kā mākou hale hana.
Ka lawe ʻana a me ka mālama ʻana
1, Epoxy zinc-waiwai primer i ka lawe ʻana, pono e pale i ka ua, ka ʻike ʻana o ka lā, e pale i ka hui ʻana.
2, Pono e mālama ʻia ka Epoxy zinc-waiwai primer ma kahi ʻoluʻolu a me ka ventilated, pale i ka lā pololei, a hoʻokaʻawale i ke kumu ahi, mai kahi kumu wela i ka hale kūʻai.
Pale palekana
Pono e loa'a i ke kahua kūkulu nā hale ho'ohehe'e maika'i, pono nā mea pena i nā makaaniani, nā mīkina lima, nā maka, a me nā mea'ē a'e, e pale aku i ka pili 'ili a me ka inhalation o ka noe pena. Ua pāpā loa ʻia ke ahi ahi ma ke kahua kūkulu.
