Polyurethane hao ʻulaʻula anti-corrosion primer

ʻO ka polyurethane ʻulaʻula iron oxide corrosion primer (Polyurethane red iron oxide corrosion primer) i loko o nā resins hydroxyl-containing, iron oxide red, antirust pigmented fillers, additives, solvents, etc., a me ka polyurethane red iron oxide corrosion primer i haku ʻia me ka polyisocyanate prepolymer.

Polyurethane hao ʻulaʻula kumu mua, polyurethane hao ʻulaʻula pena, polyurethane hao ʻulaʻula pale anti-corrosion.

Na Waiwai Pilikino No.	33646
UN No.	1263
Organic solvent volatilization	64 m³ maʻamau
Brand	Pena Jinhui
Hoʻohālike	S50-1-2
kalakala	ʻulaʻula hao
Lakiō huikau	Luna nui: laau ho'ōla=20:5
Ka nana aku	ʻili pahee

Kūlana i loko o ka ipu: ʻaʻohe lumps paʻakikī ma hope o ka hui ʻana, ma kahi kūlana homogeneous
Hiki ke kūkulu ʻia: ʻaʻohe mea pale no ka noi
Nānā kiʻiʻoniʻoni: maʻamau
ʻAʻohe wai paʻakai: ʻaʻohe māhā, ʻaʻohe blistering, ʻaʻohe peeling (helu helu maʻamau: GB/T9274-88)
Ke kūpale ʻana i ka ʻakika: ʻaʻohe māhā, ʻaʻohe blistering, ʻaʻohe peeling (helu helu maʻamau: GB/T9274-88)
Palekana alkali: ʻaʻohe māhā, ʻaʻohe blistering, ʻaʻohe peeling (helu helu maʻamau: GB/T9274-88)
Kūleʻa kūlou: 1mm (Ka helu helu maʻamau: GB/T1731-1993)
Ka manawa maloʻo: maloʻo ʻili ≤ 1h, maloʻo paʻa ≤ 24h (helu helu maʻamau: GB / T1728-79)
Ke kū'ē i ka hopena: 50cm (Ka helu helu maʻamau: GB/T4893.9-1992)

Hoʻopili ʻia i nā hale kila, nā pahu aila, nā pahu aila, nā lako anticorrosive kemika, nā lako electromechanical, nā kaʻa lawe e like me ka uhi antirust priming.

Ua pena pololei ʻia ma ka ʻili o ke kila me ka maikaʻi o ka wehe ʻana i ka ʻōpala a hiki i ka papa Sa2.5.

ʻO ka pena hao puaʻa polyurethane, pena polyurethane, ka lole luna polyurethane acrylic, ka lole luna fluorocarbon.

Manaʻo ʻia ka mānoanoa kiʻiʻoniʻoni: 60-80um
Theoretical dosage: ma kahi o 115g/m² (e pili ana i ke kiʻi maloʻo 35um, ʻaʻole me ka nalowale).
Ka helu o nā pālule i manaʻo ʻia: 2 ~ 3 pālule
Ka mahana mālama:-10~40 ℃
Ka mahana hana: 5 ~ 40 ℃
Manawa hoao: 6h
ʻO ke ʻano hana: Brushing, ea spraying, rolling hiki ke hoʻohana.
Ka wā pena:
Ka wela o ka lepo ℃ 5-10 15-20 25-30
ʻOi aku ka pōkole h48, 24, 12
ʻAʻole iʻoi aku ka lōʻihi ma mua o 7 mau lā.
Pono ke kiʻekiʻe o ka mahana o ka substrate ma mua o ka hau ma mua o 3 ℃, ke emi ka mahana o ka substrate ma lalo o 5 ℃, ʻaʻole hoʻōla ʻia ka kiʻi pena, a ʻaʻole pono e kūkulu ʻia.

Ma hope o ka wehe ʻana i ka pahu o ka mea A, pono e hoʻoulu maikaʻi ʻia, a laila ninini i ka hui B i loko o ka ʻāpana A ma lalo o ka hoʻoulu ʻana e like me nā koi hoʻohālikelike, hui maikaʻi a waiho iā ia e oʻo no 30mins, a laila e hoʻohui i ka nui o ka thinner kūpono a hoʻoponopono iā ia. ka viscosity kūkulu.
Diluent: hoʻoheheʻe kūikawā no ka moʻo polyurethane.
ʻO ka hoʻoheheʻe ʻana i ka ea: ʻo 0-5% ka nui o ka dilution (ma ke kaupaona ʻana o ka pena), ʻo ka nozzle caliber he 0.4mm-0.5mm, ʻo ke kaomi ʻana he 20MPa-25MPa (200kg/cm²-250kg/cm²).
ʻO ka hoʻoheheʻe ʻana o ka ea: ʻO ka nui o ka dilution he 10-15% (ma ke kaupaona ʻana o ka pena), ʻo ka nozzle caliber he 1.5mm-2.0mm, ʻo ke kaomi ʻana he 0.3MPa-0.4MPa (3kg/cm²-4kg/cm²).
ʻO ka uhi ʻana o ka wili: 5-10% ka nui o ka dilution (ma ke ʻano o ka lākiō kaumaha pena).

I ke kūkulu ʻana i ke kau wela, maʻalahi e hoʻomaloʻo i ka pulupulu, i mea e pale aku ai i ka ʻōpala maloʻo hiki ke hoʻoponopono ʻia me ka thinner a hiki i ka maloʻo ʻole.
Pono e hoʻohana ʻia kēia huahana e nā mea pena kiʻi ʻoihana e like me nā ʻōlelo aʻoaʻo ma ka pūʻolo huahana a i ʻole kēia manual.
Pono e hoʻokō ʻia ka uhi ʻana a me ka hoʻohana ʻana i kēia huahana e like me nā kūlana olakino, palekana a me nā kūlana kūlohelohe.
Inā kānalua ʻoe inā pono e hoʻohana ʻia kēia huahana, e ʻoluʻolu e kelepona i kā mākou ʻoihana lawelawe ʻenehana no nā kikoʻī.

Nā hoʻonā